Air filter Blueprint Honda Accord 2.0

Blueprint air filter for Honda Accord CB3 F20A 2.0

The Blueprint air filter is a high-quality replacement air filter for the Honda Accord IV Sedan (CB3) with the 2.0 F20A petrol engine. The air filter removes dust, dirt and other contaminants from the intake air before they can reach the engine. This helps maintain clean intake air and efficient airflow to the engine.

The filter is designed as a replacement for the original air filter and fits into the factory air filter housing. A clean and correctly fitted air filter helps the engine operate efficiently while protecting it against harmful dirt particles.

Product details:

• Brand: Blueprint

• Part number: ADH22225

• Type: Air filter

• Application: Engine air filter

• Suitable for: Honda Accord IV Sedan

• Model code: CB3

• Engine: 2.0 F20A

• Year: 1989-1993

Installation – Honda Accord CB3 F20A:

1. Switch off the engine and allow it to cool.

2. Open the bonnet and locate the original air filter housing.

3. Loosen the bolts securing the air filter housing cover.

4. Remove the cover and take out the old air filter.

5. Clean any dust or dirt from inside the housing with a clean cloth.

6. Install the new Ashuki H089-12 air filter and make sure it is correctly seated and seals properly around the edges.

7. Refit the housing cover and make sure it is correctly positioned.

8. Tighten the retaining bolts.

9. Check that the air filter housing is completely closed and that the filter is properly seated.

Note: Always compare the old and new filter before installation and make sure the filter is correctly positioned in the original air filter housing.