Distributor (TEC TD-86U) Ashuki Honda Civic Integra B18

Ashuki TEC TD-86U ignition distributor for Honda B18C

The Ashuki TEC TD-86U ignition distributor is a high-quality replacement for the original ignition distributor used on Honda B18C engines. The distributor ensures reliable distribution of ignition voltage to the spark plugs, helping to maintain proper ignition, smooth engine operation and reliable performance.

The TEC TD-86U is suitable for various Honda B18C engine applications, including B18C, B18C1 and B18C4 versions. A worn or faulty ignition distributor can cause starting problems, rough idling, misfires or loss of engine performance. This distributor provides a reliable replacement for the original unit.

Installation tips:

• Disconnect the battery before installation.

• Mark the position of the original distributor before removing it to help retain the original ignition setting.

• Mark the spark plug wires before disconnecting them if necessary.

• Check the O-ring on the new distributor and lightly lubricate it with clean engine oil.

• Carefully install the distributor and make sure the drive engages correctly with the camshaft. Do not force it.

• Reconnect the spark plug wires and electrical connectors in their original positions.

• Check the firing order: 1-3-4-2.

• After installation, check the ignition timing according to the factory specifications for the vehicle.

Note: Always compare the new distributor with the original unit before installation and verify that the connector and mounting configuration match.